Carbon Fiber Plate Structural Adhesive

This product's A and B components are both packaged in plastic drums.

Component A: 20kg/drum     Component B: 10kg/drum

Carbon fiber sheet structural adhesive is a high-performance epoxy-based fiber adhesive. It effectively enhances the load-bearing capacity of structural components by bonding the carbon fiber sheet to concrete elements using the carbon fiber adhesive. This method is applicable for reinforcing beams, slabs, and other structural areas.
High Strength
Strong Bonding Strength
Excellent Thixotropy
Good Durability
Application Scenario:
It is used in conjunction with prestressed carbon fiber cloth or carbon fiber sheets, primarily for the reinforcement and strengthening of building structures.
—— PRODUCT ADVANTAGES ——
High Strength
Resilient and suitable for seismic strengthening.
Strong Bonding Strength
Can be used for substrates such as concrete, steel, ceramics, stone, wood, and others.
Excellent Thixotropy
Non-flowable during overhead and vertical surface construction.
Good Durability
Resistant to chemical corrosion such as acid, alkali, salt, and harsh environments (non-toxic itself).
EXCLUSIVE FORMULA
1.WONSTAR Bonding Adhesives use nanoscale raw materials with extremely fine particles, and we also incorporate anti-flow control agents to give the adhesive excellent thixotropic properties.
2.In the adhesive formulation, we introduce hydrophilic and hydrophobic groups, allowing the adhesive to maintain outstanding bonding capability in both humid and dry environments.
3.The product also include defoaming agents to ensure that no bubbles are generated in the adhesive, preventing any impact on its strength.
4.To compensate for the epoxy resin's lack of toughness, we introduce elastic reactive spheres into the formulation, enhancing the adhesive's impact resistance and long-term performance.
Know More →
—— ALL-ENCOMPASSING APPLICATIONS ——
  • • Versatile
  • • Wide Range Of Applications
  • • Small Working Area
  • • High Efficiency
  • Structural
    Reinforcement
    Bonding
    Carbon Plates
    Steel-to-Steel
    Bonding
    Concrete-to-Concrete
    Bonding
    Sealing of
    Prefabricated Components
    —— TECHNICAL PARAMETERS ——
      INSPECTION ITEM INSPECTION CONDITION QUALIFICATION INDEX
    (GB50728-2011)
    Colloidal Properties

    Tensile strength (MPa) Test conducted at a loading speed of 2mm/min under conditions of (23±2)°C and (50±5)% relative humidity (RH).Test conducted at a loading speed of 2mm/min under conditions of (23±2)°C and (50±5)% relative humidity (RH). ≥38
    Tensile modulus of elasticity (MPa) ≥2.4×10³
    Elongation at Break (%) ≥1.5
    Flexural strength (MPa) ≥50, and no fracture failure is allowed
    Compressive strength (MPa) ≥70
    Adhesive Capability Standard value of steel-to-steel tensile shear strength (MPa) (23±2)℃, (50±5) %RH ≤14
    Steel-to-steel Bond Tensile Strength (MPa) At (23±2)°C and (50±5)% RH, the test is conducted according to the specified loading speed as per the test method standard. ≥40
    Steel-to-steel T-peel adhesion length (mm) ≤20
    Steel-to-C45 tensile bond strength (MPa) ≥2.5, and cohesive failure within the concrete
      Heat distortion temperature (°C) Using method B with a bending stress of 0.45MPa. ≥65
      Non-volatile content (%) (105±2)°C、(180±5)min ≥99
    WONSTAR has obtained certifications from authoritative organizations
    National Construction Engineering Quality Testing Center, ISO9001, ISO14001, and others.
    All product performance parameters comply with national standards
    The testing report results fully comply with national standards such as
    GB50550-2010 'Code for acceptance of construction quality of building structure reinforcement,' GB50367-2013 'Code for design of reinforced concrete
    structures,' and GB50728-2011 'Technical specification for safety identification of engineering structural reinforcement materials.
    ABOUT WONSTAR
    WONSTAR focuses on the research, production, sales, and service of reinforcing materials such as carbon fiber composites, epoxy structural adhesives, and grouting materials.

    Committed to providing a one-stop solution for the reinforcement, renovation, and repair of buildings, bridges, roads, water conservancy projects, and other structures, ensuring that structural engineering is more robust and secure, safeguarding the beauty of human habitats.
    —— APPLICATION CASES ——
    KNOW MORE→
    OUTSTANDING EQUIPMENT
    Focusing on the research and development, production, sales and service of reinforcement materials such as carbon fiber composite, epoxy structural adhesive and grouting material, we are committed to providing one-stop solutions for the reinforcement,
    Get the Price Now
    HOW CAN WE HELP YOU?
    fill your requirements here, and we'll send the customized solution and quotation to you by the reserved contact information.
    SUBMIT NOW
    Close